1 Delivery program HVAC for plumbing and installation The technology......for soldering, brazing and welding. FELDER GMB...
Delivery program HVAC for plumbing and installation
The technology.......
......for soldering, brazing and welding. FELDER GMBH Löttechnik Im Lipperfeld 11 D-46047 Oberhausen
Tel. +49 (0)208 / 85035-0 Fax +49 (0)208 / 26080 Email: [emailprotected] Internet: www.felder.de
FELDER GMBH Löttechnik Postfach 10 04 10 D-46004 Oberhausen
Contents
Page
Quality assurance
5
Soft solders as rods, lead wool and rolled lead
6
Rosin and Stearin plumber‘s solders
7
Solder liquid for zinc and galvanised sheets
8
“ZD” & “ZD - Spezial“ solder liquids
Solder liquid for coated zinc sheets
9
“ZD - Pro” & “ZD - Quartz“ solder liquids
Solder liquid for steel, stainless steel and copper sheeting “ST” solder oil, “VA-NOX” solder liquid, “KD” solder liquid
Auxiliary materials
Solder liquid bottle, Acid bottle, Simple-Fix, Solder liquid brush, Soldering stones
Fitting solders for copper piping installation Cu-Rotin®3 / Cu-Rotin®4 fitting solder
Solder pastes and soft solder flux for copper piping installation Cu-Rofix®3-Spezial / Cu-Rofix®4-Spezial fitting solder paste Cu-Rofix®3 / Cu-Rofix®4 / Cu-Roplus fitting solder paste ® Cu-Roflux®39 solder liquid, Cu-Roclean® / Cu-Roflow soft solder flux ®
Copper hard solders and fluxes for copper piping installation
Copper hard solder Cu-Rophos®94 / 94 - ÖKO / Cu-Rophos®2, hard solder flux Cu-Rosil®
10
11
12
13 14 15
16
Copper hard solders and fluxes in refrigeration and air conditioning applications
Cu-Rophos®5 / Cu-Rophos®15 copper hard solder, “CuFe Nr.1”/“CuFe Nr.1 Spezial” hard solder flux 17
Silver hard solders for copper piping installation L-Ag34Sn / L-Ag44 / L-Ag45Sn silver hard solder
Silver hard solders
18
19
20 21
Cadmium-free silver hard solders Cadmium-containing silver hard solders
Accessories for copper piping installation Cu-Rovlies cleaning fleece / Heat protection mats, internal pipe cleaner brushes
-2-
22
© 2007 FELDER GMBH Löttechnik
Copper hard solders
Contents Thread sealants
Hemp braids, dispensers, reels and balls PTFE thread sealants, LOCHER-PASTE, stoppers, Loctite® 55
Page
23 24
FERMIT, Nissen & Volk products
NEO-FERMIT, PLASTIC-FERMIT, KESSEL cement, FERMITEX, FERMIT-Spezial, 25 3-D cement, AQUA-FERMIT, HIGH PRESSURE FERMIT, PVC adhesives and cleaning agents, FERMITOL 26
Loctite products Loctite® 511 / 561 / 577 / 5331
Spray products
27
Leak detection spray, burner cleaning agent, boiler cleaning agent, thread cutting agent, Cutting oil spray, rust remover, silicon, separating and zinc spray, Aluminium, stainless steel, copper, brass, zinc / aluminium sprays
28 29 30
Lubricant and noise insulation set
31
Fitting foam adhesives and accessories Fitting foam adhesives, gun foam, 2K foam, gun foam cleaning agent, foam guns
32
Silicone sealants and accessories Acetic and neutral cure silicone, high temperature silicone, acrylic, Glättfix, skeleton gun
Welding wires Copper welding wire, bronze welding wire and autogenous welding wire
Brass hard solder
33
35
36 37
Brass and special brass hard solder Special brass and new silver hard solder
Flux for brass hard solders “Universal” hard solder powder / paste, pickling agent 148
Flux for general soldering Solder liquid, solder grease
38
39
Flux-cored soft solder wires ISO-Core®”RA”, “EL” ISO-Core®”SP”, “AL”, “VA”
40 41
Auxiliary materials Tinner, de-solder braid, white vaseline
-3-
42
Notes _____________________________________________________________________________ _____________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ _______________________________________________________________________________________ _______________________________________________________________________________________ _______________________________________________________________________________________ _______________________________________________________________________________________ _______________________________________________________________________________________
-4-
ISO 9001 - quality assurance
Our lab for product research and quality control FELDER GMBH is an innovative company that specialises in soldering technology. Using the latest production processes, we guarantee a high and consistent quality for our solders and fluxes. All FELDER products are subject to continuous quality control by our lab and are manufactured according to ISO 9001:2000 standards. Our lab is equipped with optical emission spectrometers and infrared spectrophotometers, among other things. We also implement traditional analytical methods. These form the basic conditions for many of our forward-looking developments.
We are committed to providing competent advisory services and solutions for a customer’s specific problem. Our extensive range of products makes us a very capable partner for industry and trade. We gladly comply with your specifications and look forward to working together!
-5-
Soft solders as rods, lead wool and rolled lead
Soft solder rods acc. to DIN EN 29453 PU
Delivery form
Sizes
25.0 kg
Triangular rods
ca.10 x 10 x 10 x 400 mm
25.0 kg
Pressed rods
ca. 8 x 10 x 400 mm
Item no.
Alloy
Melting range
Description and application
12310120
S-Pb70Sn30
183 - 255 °C
Triangular rods, radiator construction, soldering of stainless steel
12360122
S-Pb65Sn35
183 - 245 °C
Triangular rods, lead cable sheath, Zn and Zn alloys
12410122
S-Pb60Sn40
183 - 235 °C
Roofing tin for Cu and Zn gutters
12510120
S-Pb50Sn50Sb
185 - 216 °C
Triangular rods, general soldering in metal crafts
12610120
S-Sn60Pb40Sb
183 - 190 °C
Triangular rods, general soldering in metal crafts
12970120
S-Sn97Cu3
230 - 250 °C
Lead-free roofing tin for Cu gutters (w/o rivet joints)
12990120
Sn99,9
232 °C
Pure tin (also with Cu or Sb additives)
Other alloys, sizes and delivery forms are available upon request.
Lead wool In quality suited for sealing of earthenware ducts
Item no.
PU
Delivery form
13009199
50.0 kg
Bag
Merkur rolled lead Pb99,97 Cu0,03-0,05% with size and weight information imprinted PU
Delivery form
Standard size
50.0 kg
Roll
1.25 x 1,000 mm
Standard blanks: 200 mm, 250 mm, 330 mm, 450 mm Other sizes and delivery forms are available upon request.
-6-
Rosin and Stearin plumber‘s solders
Rosin - plumber‘s solder Flux-cored soft solder wire for soldering of copper and lead (lead sheathed cables), acc. to DIN EN 29454.1, 1.1.1.B.
Item no.
Coil weight
19325041
1.0 kg
19325051
5.0 kg
19375041
1.0 kg
19375051
5.0 kg
19415041
1.0 kg
19415051
5.0 kg
19615041
1.0 kg
19615051
5.0 kg
Alloy
DIN EN 29453
Melting range
Pb70Sn30
S-Pb70Sn30
183 - 255 °C
Pb65Sn35
S-Pb65Sn35
183 - 245 °C
Diameter
5.00 mm Pb60Sn40
S-Pb60Sn40
183 - 235 °C
Sn60Pb40
S-Sn60Pb40Sb
183 - 190 °C
Other alloys, sizes and delivery forms are available upon request.
Stearin - plumber‘s solder Flux-cored soft solder wire for soldering of lead piping and sheets, acc. to DIN EN 29454.1, 2.2.3.B.
Item no.
Coil weight
16325041
1.0 kg
16325051
5.0 kg
16375041
1.0 kg
16375051
5.0 kg
16415041
1.0 kg
16415051
5.0 kg
16615041
1.0 kg
16615051
5.0 kg
Alloy
DIN EN 29453
Melting range
Pb70Sn30
S-Pb70Sn30
183 - 255 °C
Pb65Sn35
S-Pb65Sn35
183 - 245 °C
Diameter
5.00 mm Pb60Sn40
S-Pb60Sn40
183 - 235 °C
Sn60Pb40
S-Sn60Pb40Sb
183 - 190 °C
Other alloys, sizes and delivery forms are available upon request.
-7-
Solder liquid for zinc and galvanised sheets
Solder liquid “ZD” DIN EN 29454.1, 3.2.2.A (F-SW 11) for soft soldering of new and oxidised titanium zinc, galvanised sheet steel and refined zinc
Item no.
Delivery form
PU
Description
24110050
Bottle
50 pcs
0.100 kg bottle with brush inset
24110055
Bottle
45 pcs
0.250 kg bottle with brush inset
24110060
Bottle
30 pcs
0.500 kg bottle
24110070
Bottle
15 pcs
1.0 kg bottle
24110085
Canister
1 pc
30.0 kg canister
24110022
Simple-fix
12 pcs
“new!” 25 ml Simple-fix “new!”
24110052
Simple-fix
12 pcs
“new!” 100 ml Simple-fix “new!”
Solder liquid “ZD - Spezial” DIN EN 29454.1, 3.2.2.A (F-SW 11) for soft soldering of heavily oxidised titanium zinc, galvanised sheet steel and refined zinc
Item no.
Delivery form
PU
Description
24110250
Bottle
50 pcs
0.100 kg bottle with brush inset
24110270
Bottle
15 pcs
1.0 kg bottle
24110285
Canister
1 pc
25.0 kg canister
24110222
Simple-fix
12 pcs
“new!” 25 ml Simple-fix “new!”
24110252
Simple-fix
12 pcs
“new!” 100 ml Simple-fix “new!”
-8-
Solder liquid for coated zinc sheets
!” w e “n Solder liquid “ZD - pro” DIN EN 29454.1, 3.2.2.A (F-SW 11) for soft soldering of RHEINZINK® “walzblank”, RHEINZINK® “vorbewittert pro” blue-grey and grey and NedZink “Nova”
Item no.
Delivery form
PU
24110570
Bottle
15 pcs
24110522
Simple-fix
24110552
Simple-fix
Description
12 pcs
1.0 kg bottle “new!” 25 ml Simple-fix
“new!”
12 pcs
“new!” 100 ml Simple-fix
“new!”
!” w e “n Solder liquid “ZD - Quartz” DIN EN 29454.1, 3.2.2.A (F-SW 11) for soft soldering of VM-ZINC® “QUARTZ-ZINC®” and “ANTHRA-ZINC®”
Item no.
Delivery form
PU
Description
24110670
Bottle
15 pcs
1.0 kg bottle
24110622
Simple-fix
12 pcs
“new!” 25 ml Simple-fix
“new!”
24110652
Simple-fix
12 pcs
“new!” 100 ml Simple-fix
“new!”
-9-
Solder liquid for steel, stainless steel and copper sheeting
Solder oil “ST” DIN EN 29454.1, 3.2.2.A (F-SW 11) for soft soldering of steel and stainless steel For soft soldering of stainless steel we recommend using our ISO-Core® “VA” flux-cored solder wire (see page 41)
Item no.
Delivery form
PU
Description
24100051
Bottle
100 pcs
100 ml bottle with brush inset
24100056
Bottle
45 pcs
250 ml bottle
24100061
Bottle
20 pcs
500 ml bottle
24100022
Simple-fix
12 pcs
“new!” 25 ml Simple-fix “new!”
24100052
Simple-fix
12 pcs
“new!” 100 ml Simple-fix “new!”
Solder liquid “VA-NOX” DIN EN 29454.1, 3.2.1.A for soft soldering of stainless steel roofing sheets - zinc-chloride-free - recommended by the Informationstelle Edelstahl Rostfrei -
Item no.
Delivery form
PU
Description
24010070
Bottle
15 pcs
1.0 kg bottle
24010022
Simple-fix
12 pcs
“new!” 25 ml Simple-fix “new!”
24010052
Simple-fix
12 pcs
“new!” 100 ml Simple-fix “new!”
Solder liquid “KD” DIN EN 29454.1, 3.1.1.A (F-SW 21) for soft soldering of copper gutters and down-pipes
Item no.
Delivery form
PU
Description
24300050
Bottle
50 pcs
0.100 kg bottle with brush inlet
24300055
Bottle
45 pcs
0.250 kg bottle with brush inlet
24300060
Bottle
30 pcs
0.500 kg bottle
24300070
Bottle
15 pcs
1.0 kg bottle
24300022
Simple-fix
12 pcs
“new!” 25 ml Simple-fix “new!”
24300052
Simple-fix
12 pcs
“new!” 100 ml Simple-fix “new!”
- 10 -
Auxiliary materials
Solder liquid bottle - Acid bottle refillable, made of plastic
Item no.
Delivery form
27110000
Solder liquid bottle (yellow)
27120000
Acid bottle (blue)
!” “new
PU
Description
150 St
Content 150 ml, bottom size 60 x 60 mm
Simple - Fix
Empty container for refilling, consisting of solder liquid container, brush attachment and screw-type cap PU
Content
100 pcs
25 ml
100 pcs
40 ml
100 pcs
100 ml
Delivery form Simple-fix
Solder liquid brush with metal body and natural bristles
Item no.
PU
Description
27130000
100 pcs
Solder liquid brush with metal body and natural bristles, approx. 10 mm wide
Soldering stones for cleaning of soldering tips
Item no.
Größe
PU
Description
27100001
1
300 pcs
65 x 45 x 20 mm
27100002
2
150 pcs
65 x 45 x 40 mm
27100004
4
100 pcs
100 x 45 x 25 mm in plastic case
27100008
8
100 pcs
100 g in can
- 11 -
Fitting solders for copper piping installation
Fitting solder Cu-Rotin®3 for soft soldering of copper piping in drinking water and heating installations (less than 110°C) in accordance with DVGW-Arbeitsblatt GW 2, awarded the RAL mark of quality of Gütegemeinschaft Kupferrohr e.V.
Item no.
Delivery form
PU
14972010
0.100 kg spool
100 pcs
149720201
0.250 kg spool
50 pcs
14972710
0.100 kg spool
100 pcs
149727201
0.250 kg spool
50 pcs
Diameter
Alloy
Melting range
S-Sn97Cu3
230 - 250 °C
Alloy
Melting range
S-Sn97Ag3
221 - 224 °C
2.00 mm 2.70 mm
Fitting solder Cu-Rotin®4 for soft soldering of copper piping in drinking water and heating installations (less than 110°C) in accordance with DVGW-Arbeitsblatt GW 2, awarded the RAL mark of quality of Gütegemeinschaft Kupferrohr e.V. Also suited for soldering of steel and stainless steel, in connection with our solder oil “ST” or solder liquid “VA-NOX” (pg. 18)! Other sizes and delivery forms are available upon request.
Item no.
Delivery form
PU
14952010
0.100 kg spool
100 pcs
14952020
0.250 kg spool
50 pcs
14953010
0.100 kg spool
100 pcs
14953020
0.250 kg spool
50 pcs
Diameter 2.00 mm 3.00 mm
For soft soldering of water pipes the solders listed above are to be used according to DIN EN 29453. In compliance with DVGW (Deutsche Vereinigung des Gas- und Wasserfaches e.V.) regulations, only flux may be used according to the DVGWArbeitsblatt GW 7 for copper pipe installation. When working, solid solder wire must additionally be added in order to achieve necessary filling of the solder gap. The solid solder wire should have the same alloy as the solder in the solder paste.
- 12 -
Solder pastes for copper piping installation
Fitting solder paste Cu-Rofix®3-Spezial DIN EN 29453, S-Sn97Cu3, DIN EN 29454.1, 3.1.1.C for soft soldering of copper piping in drinking water and heating installations in accordance with DVGW-Arbeitsblatt GW 7, awarded the RAL mark of quality of Gütegemeinschaft Kupferrohr e.V. Metal content at least 60%. The flux residue is soluble in cold water and can be easily removed by rinsing. DVGW mark of conformity: DV-0101 AT 2247
Item no.
Delivery form
PU
229760501
0.100 kg jar with brush clip and holder
100 pcs
229760551
0.250 kg jar with brush clip and holder
50 pcs
Alloy
Melting range
S-Sn97Cu3
230 - 250 °C
Alloy
Melting range
S-Sn97Ag3
221 - 240 °C
Fitting solder paste Cu-Rofix®4-Spezial DIN EN 29453, S-Sn97Ag3, DIN EN 29454.1, 3.1.1.C for soft soldering of copper piping in drinking water and heating installations acc. to DVGW-Arbeitsblatt GW 7, awarded the RAL mark of quality of Gütegemeinschaft Kupferrohr e.V. Metal content at least 60%. The flux residue is soluble in cold water and can be easily removed by rinsing.
Item no.
Delivery form
PU
229560501
0.100 kg jar with brush clip and holder
100 pcs
229560551
0.250 kg jar with brush clip and holder
50 pcs
The specific advantages • The solder powder component does not settle, meaning the solder paste must not be stirred. • The excellent gap filling properties contribute to optimisation of the shearing resistance. • Due to the large effective area, the overheating limit is correspondingly high. In addition, melting of the solder component announces achievement of working temperature. • The high holding time of the solder paste allows optimal processing even days after application. • Flux residue is up to 100% soluble in cold water and can be removed easily with rinsing.
- 13 -
Solder pastes and soft solder fluxes for copper piping installation
Fitting solder paste Cu-Rofix®3 DIN EN 29453, S-Sn97Cu3, DIN EN 29454.1, 3.1.1.C for soft soldering of copper piping in drinking water and heating installations acc. to DVGW-Arbeitsblatt GW 7. Metal content at least 60%. The flux residue is soluble in cold water and can be easily removed by rinsing.
Item no.
Delivery form
PU
22976050
0.100 kg plastic jar
100 pcs
2297605511
0.250 kg plastic jar
50 pcs
Alloy
Melting range
S-Sn97Cu3
230 - 250 °C
Alloy
Melting range
S-Sn97Ag3
221 - 240 °C
Fitting solder paste Cu-Rofix®4 DIN EN 29453, S-Sn97Ag3, DIN EN 29454.1, 3.1.1.C for soft soldering of copper piping in drinking water and heating installations acc. to DVGW-Arbeitsblatt GW 7. Metal content at least 60%. The flux residue is soluble in cold water and can be easily removed by rinsing.
Item no.
Delivery form
PU
22956050
0.100 kg plastic jar
100 pcs
22956055
0.250 kg plastic jar
50 pcs
Soft solder flux Cu-Roplus® Paste-like flux in accordance with DIN EN 29454.1, 3.1.1.C for soft soldering of copper piping in drinking water and heating installations acc. to DVGW-Arbeitsblatt GW 7, awarded the RAL mark of quality of Gütegemeinschaft Kupferrohr e.V. The flux residue is soluble in cold water and can be easily removed by rinsing. DVGW mark of conformity: DV 0101 AT 2243
Item no.
Delivery form
PU
Description
24310199
Tube
100 pcs
70 g tube
24310150
Plastic jar
50 pcs
0.100 kg jar with brush holder
- 14 -
Soft solder flux for copper piping installation
Solder liquid Cu-Roflux®39 Flux in accordance with DIN EN 29454.1, 3.1.1.A for soft soldering of copper piping in drinking water and heating installations acc. to DVGW-Arbeitsblatt GW 7, awarded the RAL mark of quality of Gütegemeinschaft Kupferrohr e.V. The flux residue is soluble in cold water and can be easily removed by rinsing. DVGW mark of conformity: DV-0101 AT 2246
Item no.
Delivery form
PU
Description
24300150
Bottle
50 pcs
0.100 kg bottle with brush inset
24300155
Bottle
45 pcs
0.250 kg bottle with brush inset
24300160
Bottle
30 pcs
0.500 kg bottle
24300170
Bottle
15 pcs
1.000 kg bottle
24300185
Canister
1 pc
30.000 kg canister
24300122
Simple-fix
12 pcs
“new!”25 ml Simple-fix “new!”
24300152
Simple-fix
12 pcs
“new!”100 ml Simple-fix“new!“
Soft solder flux Cu-Roclean® ph neutral • dermatologically safe • environmentally safe Zinc-chloride-free flux in accordance with DIN EN 29454.1, 2.1.2.C for soft soldering of copper piping in drinking water and heating installations acc. to DVGW-Arbeitsblatt GW 7, awarded the RAL mark of quality of Gütegemeinschaft Kupferrohr e.V. The flux residue is soluble in cold water and can be easily removed by rinsing. DVGW mark of conformity: DV-0101 AT 2046 Item no.
Delivery form
PU
Description
24350152
Plastic jar
50 pcs
0.125 kg plastic jar with brush holder
Soft solder flux Cu-Roflow® Zinc-chloride-free flux in accordance with DIN EN 29454.1, 2.1.2.C for soft soldering of copper piping in drinking water and heating installations. The flux residue is soluble in cold water and can be easily removed by rinsing.
Item no.
Delivery form
PU
Description
24350250
Plastic jar
50 pcs
0.100 kg plastic jar
- 15 -
Copper hard solders and fluxes for copper piping installation
Copper hard solder Cu-Rophos® 94
DIN EN 1044, CP 203; ISO 3677, B-Cu94P; DIN 8513, L-CuP6 acc. to DVGW-Arbeitsblatt GW 2 for flux-free soldering of copper-to-copper joints in oil, gas and liquefied gas installations as well as in heating and drinking water installations with piping larger than 28 x 1.5 mm, awarded the RAL mark of quality of Gütegemeinschaft Kupferrohr e.V. When soldering brass or red brass, it is also necessary to use our Cu-Rosil® flux. Item no.
Size
330120501
2.00 mm square x 500 mm
330130501
3.00 mm square x 500 mm
PU
Delivery form
25.0 kg
1.0 kg box
Copper hard solder Cu-Rophos® 94 - ÖKO
DIN EN 1044, CP 203; ISO 3677, B-Cu94P; DIN 8513, L-CuP6 1,0 kg box, identical composition as Cu-Rophos® 94. Not stained due to environmental reasons, the rods therefore keep a naturally dark copper tone. Item no.
Size
33012050
2.00 mm square x 500 mm
33013050
3.00 mm square x 500 mm
PU
Delivery form
25.0 kg
1.0 kg box
Copper hard solder Cu-Rophos® 2
DIN EN 1044, CP 105; ISO 3677, B-Cu92PAg; DIN 8513, L-Ag2P acc. to DVGW-Arbeitsblatt GW 2 for flux-free soldering of copper-to-copper joints in oil, gas and liquefied gas installations as well as in heating and drinking water installations with piping larger than 28 x 1.5 mm, awarded the RAL mark of quality of Gütegemeinschaft Kupferrohr e.V. When soldering brass or red brass, it is also necessary to use our CuRosil® flux. Item no.
Size
333120501
2.00 mm square x 500 mm
333130501
3.00 mm square x 500 mm
PU
Delivery form
25.0 kg
1.0 kg box
Other sizes and delivery forms are available upon request.
Flux for copper and silver solders Cu-Rosil®
Paste, DIN EN 1045 - FH 10, hard solder flux for soldering of copper piping in drinking water, heating, gas and oil installations in connection with brass and red brass fittings DVGW mark of conformity: DV 0101 AT 2245
Item no.
Content
PU
26100050
0.100 kg
50 pcs
26100055
0.250 kg
45 pcs
26100060
0.500 kg
30 pcs
26100070
1.000 kg
15 pcs
- 16 -
Effective temperature
Delivery form
500 - 800 °C
Plastic jar
Copper hard solders and fluxes for refrigeration and air conditioning applications
Copper hard solder Cu-Rophos® 5
DIN EN 1044, CP 104; ISO 3677, B-Cu89PAg; DIN 8513, L-Ag5P, for hard soldering of copper piping in refrigeration and air conditioning applications Item no.
Size
33331550
1.50 mm square x 500 mm
33332050
2.00 mm square x 500 mm
33333050
3.00 mm square x 500 mm
PU
Delivery form
25.0 kg
1.0 kg box
Copper hard solder Cu-Rophos® 15
DIN EN 1044, CP 102; ISO 3677, B-Cu80AgP; DIN 8513, L-Ag15P, for hard soldering of copper piping in refrigeration and air conditioning applications Item no.
Size
33401550
1.50 mm square x 500 mm
33402050
2.00 mm square x 500 mm
33403050
3.00 mm square x 500 mm
PU
Delivery form
25.0 kg
1.0 kg box
Flux for silver solders “CuFe Nr. 1” Paste, DIN EN 1045 - FH 10, hard solder paste for soldering of copper, copper base alloys, steel and stainless steel
Flux for silver solders “CuFe P”
Powder, DIN EN 1045 - FH 10, hard solder paste for soldering of copper, copper base alloys, steel and stainless steel
Item no.
Content
PU
261000501
0.100 kg
50 pcs
261000701
1.0 kg
15 pcs
26150050
0.100 kg
50 pcs
26150070
1.0 kg
16 pcs
Effective temperature
Delivery form
500 - 800 °C
Paste, plastic jar
500 - 800 °C
Powder, plastic jar
Effective temperature
Delivery form
500 - 800 °C
Plastic jar
Flux for silver solders “CuFe Nr. 1 - Spezial” Paste, DIN EN 1045 - FH 12, hard solder paste for soldering of hard metals, stainless and non-scaling steels
Item no.
Content
PU
261000509
0.100 kg
50 pcs
261000709
1.0 kg
15 pcs
- 17 -
Copper hard solders
FELDER copper hard solders DIN EN 1044
Article name
Delivery forms
Sizes
500 mm rods, 1 kg catchweight coils, wire on spools, strips as of 0.05 mm thick, max. width 70 mm, preformed as wire, as ring or lengths, preformed from strip as small plate or discs
1.5 mm
Composition (weight %)
ISO 3677 Ag
Cu
P
Sn
2.0 mm 3.0 mm 4.0 mm
Working temperature
Tensile strength of soldering (N/mm²)
Density (g/cm²)
For hard soldering of the following base materials
Cu-Rophos 94 CP 203
B-Cu94P 710/890
-
94
6
-
730 °C
250
8.1
Cu-Rophos®93 CP 202
B-Cu93P 710/820
-
93
7
-
720 °C
250
8.1
Cu-Rophos®92 CP 201
B-Cu92P 710/770
-
92
8
-
710 °C
250
8.0
Cu-Rophos®2 CP 105
B-Cu92PAg 645/825
2
91.5
6.5
-
710 °C
250
8.1
Cu-Rophos®5 CP 104
B-Cu89PAg 645/815
5
89
6
-
710 °C
250
8.2
not to be used with sulphureous materials
Cu-Rophos®15 CP 102
B-Cu80AgP 645/800
15
80
5
-
710 °C
250
8.4
heat resistant up to 200 °C
Cu-Rophos®18 CP 101
B-Cu75AgP 645/670
18
75
7
-
650 °C
250
8.4
Cu-Rophos®86 CP 302
B-Cu86SnP 645/695
-
86.25
6.75
7
690 °C
250
8.0
®
Other alloys and sizes are available upon request.
- 18 -
Copper-to-copper (without flux) Brass, red brass and copper/tin alloys with flux for silver solder Cu-Rosil®
With gas or liquefied gas, heat resistant up to 150 °C
Silver hard solders for copper piping installation
Silver hard solder L-Ag34Sn
DIN 8513; DIN EN 1044 Ag 106; ISO 3677, B-Cu36AgZnSn acc. to DVGW-Arbeitsblatt GW 2 for soldering of copper-to-copper joints, brass and steel in oil, gas and liquefied gas installations as well as in heating and drinking water installations with piping larger than 28 x 1.5 mm. In addition a hard solder flux must be used according to DIN EN 1045, Type FH10. Item no.
Size
34311550
1.50 mm Ø
34312050
2.00 mm Ø
3431155090
1.50 mm Ø
3431205090
2.00 mm Ø
PU
Delivery form 500 mm rods
1.0 kg
500 mm rods flux-coated DIN EN 1045-FH10
Silver hard solder L-Ag44
DIN 8513; DIN EN 1044 Ag 203; ISO 3677, B-Ag44CuZn acc. to DVGW-Arbeitsblatt GW 2 for soldering of copper-to-copper joints, brass and steel in oil, gas and liquefied gas installations as well as in heating and drinking water installations with piping larger than 28 x 1.5 mm. In addition a hard solder flux must be used according to DIN EN 1045, Type FH10. Item no.
Size
34451550
1.50 mm Ø
34452050
2.00 mm Ø
3445155090
1.50 mm Ø
3445205090
2.00 mm Ø
PU
Delivery form 500 mm rods
1.0 kg
500 mm rods flux-coated DIN EN 1045-FH10
Silver hard solder L-Ag45Sn
DIN 8513; DIN EN 1044 Ag 104; ISO 3677, B-Ag45CuZnSn acc. to DVGW-Arbeitsblatt GW 2 for soldering of copper-to-copper joints, brass and steel in oil, gas and liquefied gas installations as well as in heating and drinking water installations with piping larger than 28 x 1.5 mm. In addition a hard solder flux must be used according to DIN EN 1045, Type FH10. Item no.
Size
34471550
1.50 mm Ø
34472050
2.00 mm Ø
3447155090
1.50 mm Ø
3447205090
2.00 mm Ø
PU
Delivery form 500 mm rods
1,0 kg
500 mm rods flux-coated DIN EN 1045-FH10
- 19 -
Cadmium-free silver hard solders
FELDER silver hard solders (cadmium-free) Delivery forms
Diameter
500 mm rods, 1 kg catchweight coils, wire on spools,
1.0 mm 1.5 mm 2.0 mm
other delivery forms on request
3.0 mm 1.5 mm
flux-coated acc. to DIN EN 1045 - FH 10
2.0 mm 3.0 mm
Composition (weight %) Rest.
Working temperature (°C)
Tensile strength of soldering (N/mm²)
Density (g/cm²)
-
-
830
400
8.5
35
-
-
810
400
8.7
41
34
-
-
780
400
8.8
heat resistant up to 300 °C
44
30
26
-
-
730
450
9.1
B-Cu36ZnAgSn 665/755
30
36
32
-
2 Sn
740
430
8.8
AG 106 (L-Ag34Sn)
B-Cu36AgZnSn 630/730
Steel, copper, copper base alloys, nickel, nickel base alloys, malleable iron
34
36
27
-
3 Sn
710
430
9.0
AG 105 (L-Ag40Sn)
B-Ag40CuZnSn 650/710
40
30
28
-
2 Sn
690
400
9.1
AG 104 (L-Ag45Sn)
B-Ag45CuZnSn 640/680
45
27
25
-
3 Sn
670
400
9.2
AG 102* (L-Ag55Sn)
B-Ag56CuZnSn 620/655
56
22
17
-
5 Sn
650
400
9.4
*partly suitable for stainless steel
AG 502 (L-Ag49)
B-Ag49ZnCuMnNi 680/705
49
17
22.5
5
6.5 Mn
690
300
8.9
Hard metal on steel, tungsten and molybdenium materials
AG 401 (L-Ag72)
B-Ag72Cu 780
72
28
-
-
-
780
340
10.0
AG 403 (L-Ag56InNi)
B-Ag56CuInNi 600/710
56
26
-
4
14 In
730
300
9.5
Article name DIN EN 1044
ISO 3677 Ag
Cu
Zn
Ni
AG 207 (L-Ag12)
B-Cu48ZnAg(Si) 800/830
12
48
40
AG 206 (L-Ag20)
B-Cu44ZnAg(Si) 690/810
20
45
AG 205 (L-Ag25)
B-Cu40ZnAg 700/790
25
AG 203 (L-Ag44)
B-Ag44CuZn 675/735
AG 107 (L-Ag30Sn)
- 20 -
For hard soldering of following base materials Steel, copper, copper base alloys, nickel, nickel base alloys, malleable iron
heat resistant up to 200 °C
Steel, stainless steel, copper, nickle and nickle base alloys
Cadmium-containing silver hard solders
FELDER silver hard solders (cadmium-containing) Delivery forms
Diameter
500 mm rods, 1 kg catchweight coils, wire on spools,
1.0 mm 1.5 mm 2.0 mm
other delivery forms on request
3.0 mm 1.5 mm
flux-coated acc. to DIN EN 1045 - FH 10
2.0 mm 3.0 mm
Working temperature (°C)
Tensile Densistrength of ty soldering (N/ (g/cm²) mm²)
Ag
Composition (weight %) Cu Zn Cd
B-Cu40ZnAgCd 605/765
20
40
25
15
-
750
410
8.8
AG 306 (L-Ag30Cd)
B-Ag30CuCdZn 600/690
30
28
21
21
-
680
420
9.2
AG 305 (L-Ag34Cd)
B-Ag35ZnCuCd 610/700
34
22
24
20
-
640
430
9.1
AG 304 (L-Ag40Cd)
B-Ag40ZnCdCu 595/630
40
19
21
20
-
610
450
9.3
Article name DIN EN 1044
ISO 3677
AG 309 (L-Ag20Cd)
Ni.
For hard soldering of following base materials
Steel, precious metals, copper, copper base alloys, nickle, nickle base alloys heat resistant up to 200 °C
Our cadmium-free and cadmium-containing silver hard solders are available in the above sizes. Except for the alloys AG 205 (L-Ag25), AG 502 (L-Ag49) and AG 401 (L-Ag72), we coat our silver solders with diameter exceeding 1.5 mm with FH10 flux according to DIN EN 1045.
With soldering with silver hard solders our hard solder flux is to be used according to DIN EN 1045, Type FH10:
Cu-Rosil®
Page 16
CuFe Nr. 1
Page 17
CuFe Nr. 1 - Spezial
Page 17
- 21 -
Accessories for copper piping installation
Cleaning fleece Cu-Rovlies metal-free. For simple cleaning of copper pipe ends
- reduces corrosion - solvent-resistant - reusable Item no.
PU
Size
Delivery form
27140000
250 pcs
ca. 60 mm x 130 mm
packs of 10
27140025
250 pcs
ca. 60 mm x 130 mm
loose in box
27141000
6 pcs
130 mm x 10 m
rolled goods
Heat protection mats
• fire-proof and flame-retardant • asbestos-free and ceramic fibre-free
Item no.
PU
Size
Description
27300000
1 pc
500 mm x 330 mm
27300800
1 pc
800 mm x 500 mm
27303000
1 pc
300 mm x 300 mm
with aluminium layer, heat resistant up to 700° C damp mat, heat resistant up to 3000° C
Internal pipe cleaner brushes
with wooden handle and rustproof trim
Item no.
PU
Size
27149000
15 mm
27149001
18 mm
27149002
100 pcs
Description packed in boxes
22 mm
27149003
28 mm
27149004
35 mm
for inner mechanical cleaning of copper fittings
- 22 -
Thread sealants
Sealing hemp for pipe thread 1a quality, for sealing of metallic thread connections with warm and cold water installations and heating and gas installations
Item no.
PU
Delivery form
27550055
62 pcs
tied in braids to approx. 220 g (1PU approx. 12.6 kg)
Hemp dispenser
Item no.
PU
Delivery form
27550040
25 pcs
40 g in plastic dispenser
27550039
1 pcs
40 g substitute spool for dispenser
27550052
12 pcs
80 g in plastic dispenser
27550053
1 pc
80 g substitute spool for dispenser
Hemp spools
Item no.
PU
Delivery form
27550050
1 pc
80 g rolled on cardboard tubing
27550051
1 pc
80 g FELDER plastic dispenser, without contents
Hemp ball
with a practical design: the strip comes from inside from a ball shrinkwrapped in foil. Can be used up fully! - 21 -
Item no.
PU
Delivery form
27550100
8 pcs
100 g wrapped in foil
- 23 -
Thread sealants
PTFE thread sealing strips DVGW-certified PTFE thread sealing strips, for fine and coarse threads according to DIN EN 751-3 fine thread FRp (DN ≤ 10) coarse thread GRp (10 ≤ DN ≤ 50) Item no.
PU
Delivery form
27510112
250 pcs
class FRp, 0.1 mm thick, 60 g/m²
27510113
250 pcs
class GRp, 0.1 mm thick, 100 g/m²
LOCHER PASTE 2000 non-hardening sealing paste for metallic thread connections for house installation, gas- and drinking water supplies as well as with waterheating systems, DIN DVGW mark of conformity NV-5142BL0134 Use with hemp to + 130 °C Item no.
PU
Delivery form
27400055
20 pcs
250 g tube
27400056
18 pcs
400 g can
27400057
18 pcs
850 g can
Stoppers Item no.
PU
Delivery form
27700001
100 pcs
plastic, ½″, blue
27700002
100 pcs
plastic, ½″, red
277000010
100 pcs
plastic with brass thread, ½″, blue
277000011
100 pcs
plastic with brass thread, ½″, red
277000012
100 pcs
plastic with brass thread, ¾″, blue
277000013
100 pcs
plastic with brass thread, ¾″, red
Loctite® 55
thread-sealing yarn with DVGW mark of conformity, non-hardening thread sealing agent for sealing of threads from ¼″ to 6″
Item no.
PU
Delivery form
27510114
48 pcs
plastic jars á 150 m
- 24 -
FERMIT, Nissen & Volk products
NEO-FERMIT UNIPURSAL
for metallic thread connections with hemp, according to DIN EN 751-2 approved for house installation of gas- and drinking water pipes by the DVGW. Item no.
PU
Delivery form
27400040
100 pcs
90 g tube
27400050
15 pcs
150 g tube
27400058
15 pcs
325 g tube
27400059
24 pcs
450 g can
27400065
18 pcs
800 g can
PLASTIC-FERMIT white
duroplastic, kneadable sealing compound, plastic-based. Sealing cement for installation of sanitary facilities Item no.
PU
Delivery form
27450055
24 pcs
0.250 kg can
27450060
30 pcs
0.500 kg can
27450070
18 pcs
1.0 kg can
27450080
1 pc
5.0 kg bucket
Feuerfester KESSEL-KITT FROSCHMARKE
is guaranteed to be fireproof against open fire and temperatures above 1000 °C, e.g. for sealing against fumes, for use with boilers, stoves and ovens. Item no.
PU
Delivery form
27460055
24 pcs
0.250 kg can
27460060
30 pcs
0.500 kg can
27460070
18 pcs
1.0 kg can
FERMITEX
chemical pipe cleaning agent simply, rapidly and reliably clears blockages, eliminates bad smells and hazardous bacteria in drains, also thaws frozen pipes.
Item no.
PU
Delivery form
27450470
12 pcs
1.0 kg plastic jar
FERMIT-Spezial
thread sealing paste for use with hemp, for use with heating-, waterand compressed air systems. Must not be used for gas- and drinking water facilities for house installation. Item no.
PU
Delivery form
27410060
24 pcs
650 g can
- 25 -
FERMIT, Nissen & Volk products
3-D cement
seals pores, cracks and faulty sealing with e.g. heating boilers
Item no.
PU
Delivery form
27480299
6 pcs
1.0 kg plastic jar
AQUA-FERMIT red
sealing- and sleeve cement, viscoplastic, easily kneadable, high adhesive quality Item no.
PU
Delivery form
27451055
24 pcs
0.250 kg can
27451060
30 pcs
0.500 kg can
27451070
18 pcs
1.0 kg can
HOCHDRUCK-FERMIT
heat- and high pressure-resistant sealing cement for e.g. high pressure facilities Item no.
PU
Delivery form
27450160
30 pcs
0.650 kg can
27450170
18 pcs
1.0 kg can
FELDER contact adhesive
universal contact adhesive for rigid PVC, various plastics, wood and felt Item no.
PU
Delivery form
27440058
50 pcs
125 ml plastic jar with brush
27440059
45 pcs
250 ml plastic jar with brush
FERMITAC rigid PVC cleaning agent
cleaning agent for pipes, sleeves and fittings of rigid PVC Item no.
PU
Delivery form
27440251
18 pcs
125 ml plastic jar
27440271
4 pcs
500 ml plastic jar
FERMITOL liquid
liquid synthetic resin sealing agent, resistant against oil
Item no.
PU
Delivery form
27430050
32 pcs
0.125 kg plastic
27430055
18 pcs
0.250 kg plastic jar
27430060
10 pcs
0.500 kg plastic jar
27430070
1 pc
1.0 kg plastic jar
- 26 -
Loctite products Thread sealants
Loctite® 511 Liquid pipe thread sealant for threads to max. R2″. The product is approved by the DVGW under No. NG-5146AR0620 (according to DIN EN 751-1) for sealing of thread connections in taps and gas devices.
Item no.
PU
Delivery form
27510115
1 pc
50 ml bottle
Loctite® 561 Low strength thread sealant as piece for thread sizes to 3″. Suitable for difficult to access adhesions or parts that cannot be moved. Does not drip. Recommended for all course metal threads that must be disassembled.
Item no.
PU
Delivery form
27510116
1 pc
19 g stick
Loctite® 577 Liquid pipe thread sealant for threads to max. R3″. BAM approval for use in oxygenated areas to 15 bar and +60 °C. DVGW clearance mark of conformity no. NG-5146AR0621. Application area: e.g. repair work, as simple disassembly is possible with normal tools. Item no.
PU
Delivery form
27510117
1 pc
50 ml bottle
Loctite® 5331 Permanent thread sealant for plastic threads, metal / metal and plastic / metal combinations. DVGW clearance mark of conformity no. NG-5146AR0618. NSF listed.
Item no.
PU
Delivery form
27510118
1 pc
100 ml tube
- 27 -
Spray products
Leak detection spray, with DVGW mark of conformity leak tightness testing agent
Item no.
PU
Delivery form
27150000
12 pcs
400 ml spray can
27150075
1 pc
5 l canister
27150100
1 pc
10 l canister
27150105
1 pc
0,5 l pump dispenser, empty
27150106
1 pc
0,5 l pump dispenser, with content
Leak detection spray, frostproof to -15 °C Item no.
PU
Delivery form
27151000
12 pcs
400 ml spray can
Burner cleaning spray
cleaning and degreasing spray for all strongly soiled burner components
Item no.
PU
Delivery form
27680061
12 pcs
500 ml spray can
Universal boiler foam cleaner
special cleaning agent for gas- and oil operated boiler systems (e.g maintenance of gas heating and hot water systems)
Item no.
PU
Delivery form
27660061
12 pcs
500 ml spray can
Thread-cutting agent, with DVGW mark of conformity in environmentally friendly pump dispenser without propellant
Item no.
PU
Delivery form
27240005
8 pcs
27240075
1 pc
5 l canister
27240100
1 pc
10 l canister
500 ml pump dispenser
- 28 -
Spray products
Cutting oil spray, with DVGW mark of conformity food safe, active substance combination contains no aggressive additives, is anti-corrosive Item no.
PU
Delivery form
27230000
12 pcs
400 ml spray can
Rust remover spray, acid-free protects against corrosion, moisture-displacing
Item no.
PU
Delivery form
27220000
12 pcs
400 ml spray can
Silicon spray Separating agent for inert gas shielded arc welding and electrode welding, prevents welding tips from sticking to the torch tips and workpieces Item no.
PU
Delivery form
27217000
12 pcs
400 ml spray can
Separating spray, silicon-free Separating spray for inert gas shielded arc welding and electrode welding, prevents cutting nozzles from becoming coated and welding tips from sticking Item no.
PU
Delivery form
27172000
12 pcs
400 ml spray can
Zinc spray Long-lasting corrosion protection for all metal surfaces, forms a quickdrying and adhering protective coating of micro-fine zinc dust Item no.
PU
Delivery form
27210000
12 pcs
400 ml spray can
- 29 -
Spray products
Aluminium spray Long-lasting corrosion protection for all metal surfaces, dries quickly and adheres to all metals, wood, ceramics, glass, etc. Item no.
PU
Delivery form
27211000
12 pcs
400 ml spray can
Stainless steel spray Corrosion protection based on acrylic resin and rustproof steel pigments, adheres to all metals, plastic, wood, stone and cardboard, heatresistant for a short period up to 300 °C Item no.
PU
Delivery form
27212000
12 pcs
400 ml spray can
Copper spray dries quickly and adheres securely to metals and other surfaces, ideal for making improvements (e.g. soldered joints and welds) Item no.
PU
Delivery form
27213000
12 pcs
400 ml spray can
Brass spray dries quickly and adheres securely to metals and other surfaces, ideal for making improvements (e.g. soldered joints and welds) Item no.
PU
Delivery form
27214000
12 pcs
400 ml spray can
Zinc / Aluminium spray Long-lasting corrosion protection for all metal surfaces, forms a quickdrying and adhering protective coating of micro-fine zinc dust Item no.
PU
Delivery form
27215000
12 pcs
400 ml spray can
- 30 -
Lubricants for connecting sleeves and noise insulation accessories
FELDER lubricant for connecting sleeves Lubricant for all connectable pipes
- excellent lubricant properties - does not leak - acid-free and solvent-free - non skin-irritating - biodegradable - lightly perfumed Item no.
PU
Delivery form
27180150
30 pcs
140 ml dosage bottle
27180155
30 pcs
250 ml dosage bottle
27180160
20 pcs
500 ml dosage bottle
FELDER lubricant, type “P” for connecting sleeve systems, approved according to KTW recommendation of the BGA Item no.
PU
27180350
50 pcs
Delivery form 150 g tube
27180355
50 pcs
250 g tube
27180360
24 pcs
500 g tube
Item no.
PU
27180371
1 pc
1 kg plastic jar
Delivery form
27180373
1 pc
5 kg bucket
Noise insulation set “WC” for wall WCs and wall bidets, closed-cell PE foam, 100% recyclable, silicone compatible, with quality certificate, thickness 4 mm
Item no.
PU
27900025
50 pcs
- 31 -
Fitting foam adhesives and accessories
Single-component fitting foam adhesive, DIN 4102 environmentally-friendly polyurethane foam for fitting, bonding, insulating and filling, inc. PDR fee Item no.
PU
Delivery form
27650066
12 pcs
750 ml can
Gun foam, DIN 4102 environmentally-friendly polyurethane foam for fitting, bonding, insulating and filling, inc. PDR fee Item no.
PU
Delivery form
27650166
12 pcs
750 ml can
2C foam, DIN 4102 universal 2-component multi-use PU foam Item no.
PU
Delivery form
27660060
12 pcs
400 ml can
Gun foam cleaning agent for cleaning of gun after work is finished Item no.
PU
Delivery form
27670061
12 pcs
500 ml can
Professional quality foam gun for gun foam, adapter and needle teflon-coated, very user-friendly and easy to clean, premium quality Item no.
PU
27630203
1 pc
Foam gun for gun foam, very user-friendly and easy to clean, standard quality Item no.
PU
27630204
1 pc
- 32 -
Silicone sealants and accessories
FELDER SANITARY SILICONE Universal
acetic cure, DIN 18545 E permanent caulking compound, anti-fungal and anti-bacterial, standard colours: transparent, white, manhattan further sanitary colours on request Item no.
PU
Delivery form
27600060
20 pcs
300 ml cartridge
HIGH-TEMPERATURE SILICONE
permanent temperature resistance to 183 °C, for a short time to 300 °C, colour: red
Item no.
PU
Delivery form
27610060
20 pcs
310 ml cartridge
SILICONE “neutral”
neutral cure and odourless, DIN EN 18545, for glazing construction standard colours: transparent, white
Item no.
PU
Delivery form
27620060
20 pcs
310 ml cartridge
ACRYLIC
caulking compound, acrylic dispersion-based, for connection joints indoors, standard colours: transparent, white, grey
Item no.
PU
Delivery form
27630160
20 pcs
310 ml cartridge
Glättfix
plastic hand-scraper for smoothing of all types of sealing compounds Item no.
PU
27630202
1 pc
Skeleton gun
open hexagonal skeleton gun, industrial and tradesman quality, for 310 ml cartridges Item no.
PU
27630201
24 pcs
- 33 -
Welding wires Copper and bronze welding wires
Copper welding wires S-Cu99,9 • S-CuSn • S-CuSi3 • S-CuAg DIN 1733 1.000 mm rods, 25,0 kg boxes
Item no.
Diameter
31002000
2.0 mm
31003000
3.0 mm
31004000
4.0 mm
31012000
2.0 mm
31013000
3.0 mm
31014000
4.0 mm
31022000
2.0 mm
31023000
3.0 mm
31024000
4.0 mm
31032000
2.0 mm
31033000
3.0 mm
31034000
4.0 mm
Alloy
Melting range
Application
S-Cu99,9
ca. 1,080 °C
Welding of copper materials
S-CuSn
1,020 - 1,050 °C
TIG-welding of copper pipes
S-CuSi3
910 - 1,025 °C
Welding of CuMn-, CuSiMn-, CuZn alloys
S-CuAg
1,070 - 1,080 °C
Gas welding of copper pipes
Bronze welding wire S-CuSn6 • S-CuSn12 DIN 1733 1.000 mm rods, 25,0 kg boxes
Item no.
Diameter
31042000
2.0 mm
31043000
3.0 mm
31044000
4.0 mm
31052000
2.0 mm
31053000
3.0 mm
31054000
4.0 mm
Alloy
Melting range
Application
S-CuSn6
910 - 1.040 °C
Welding of CuSn alloys, surface weldings
S-CuSn12
910 - 1.040 °C
Welding of CuSn alloys, especially suitable for wear-resistant applications
- 34 -
Welding wires Autogenous welding wire
Autogenous welding wire G I DIN 8554, Gruppe G I for joint-welding of wear-resistant applications with normal requirements
Item no.
Size
28101000
1.00 mm x 1000 mm
28101500
1.50 mm x 1000 mm
28102000
2.00 mm x 1000 mm
28102500
2.50 mm x 1000 mm
28103000
3.00 mm x 1000 mm
28104000
4.00 mm x 1000 mm
28105000
5.00 mm x 1000 mm
28106000
6.00 mm x 1000 mm
Description
Tensile strength
PU
Rods
380 N/mm²
25 kg box
Autogenous welding wire G II DIN 8554, Gruppe G II for joint-welding of wear-resistant applications with higher requirements Item no.
Size
28202000
2.00 mm x 1000 mm
28202500
2.50 mm x 1000 mm
28203000
3.00 mm x 1000 mm
28204000
4.00 mm x 1000 mm
Description
Tensile strength
PU
Rods
420 N/mm²
25 kg box
Autogenous welding wire G III DIN 8554, Gruppe G III for joint-welding of wear-resistant applications with high requirements Item no.
Size
28302000
2.00 mm x 1000 mm
28302500
2.50 mm x 1000 mm
28303000
3.00 mm x 1000 mm
28304000
4.00 mm x 1000 mm
Description
Tensile strength
PU
Rods
440 N/mm²
25 kg box
Other sizes are available upon request.
- 35 -
Brass and special brass hard solder
Brass hard solder ISO 3677, B-Cu60Zn(Si)(Mn); DIN EN 1044, CU 303 (formerly L-CuZn40, DIN 8513) For hard soldering of copper, nickel and steel, as well as for welding of brass and bronze. Item no.
Size
30001500
1.50 mm x 1000 mm
30002000
2.00 mm x 1000 mm
30002500
2.50 mm x 1000 mm
30003000
3.00 mm x 1000 mm
30004000
4.00 mm x 1000 mm
30005000
5.00 mm x 1000 mm
30006000
6.00 mm x 1000 mm
Description
Working temperature
PU
Rods, massive
ca. 900 °C
25 kg
Other sizes are available upon request.
Brass hard solder “G” ISO 3677, B-Cu60Zn(Si)(Mn); DIN EN 1044, CU 303 (formerly L-CuZn40, DIN 8513) flux-cored acc. to DIN EN 1044, For hard soldering of copper, nickel and steel, as well as for welding of brass and bronze. Item no.
Size
Description
Working temperature
PU
30022550
2.50 x 2.50 x 500 mm
30024050
4.00 x 4.00 x 500 mm
Rods, flux-cored
ca. 900 °C
5 kg
Description
Working temperature
PU
Rods, flux-coated
ca. 900 °C
5 kg
Description
Working temperature
PU
Rods, massive
ca. 900 °C
25 kg
Brass hard solder “UM” ISO 3677, B-Cu60Zn(Si)(Mn); DIN EN 1044, CU 303 (formerly L-CuZn40, DIN 8513) flux-coated, DIN EN 1045 FH 21 For hard soldering of copper, nickel and steel, as well as for welding of brass and bronze. Item no.
Size
30012050
2.00 mm x 500 mm
30012550
2.50 mm x 500 mm
30013050
3.00 mm x 500 mm
30014050
4.00 mm x 500 mm
Special brass hard solder ISO 3677, B-Cu59ZnSn(Ni)(Mn)(Si); DIN EN 1044, CU306 (formerly L-CuZn39Sn, DIN8513) For hard soldering of copper, nickel and steel, as well as for welding of brass and bronze.
Especially suited for hard soldering of galvanised steel sheets Item no.
Size
30102000
2.00 mm x 1000 mm
30103000
3.00 mm x 1000 mm
30104000
4.00 mm x 1000 mm
- 36 -
Special brass and nickel brass hard solder
Special brass hard solder “G”
ISO 3677, B-Cu59ZnSn(Ni)(Mn)(Si) DIN EN 1044, CU 306 (formerly L-CuZn39Sn, DIN8513) flux-cored, DIN EN 1045 - FH 21 For hard soldering of copper, nickel and steel, as well as for welding of brass and bronze.
Especially suited for hard soldering of galvanised steel sheets Item no.
Size
Description
Working temperature
PU
30122550
2.50 mm x 500 mm
30123550
3.50 mm x 500 mm
Rods, drilled, flux-cored
ca. 900 °C
5 kg
Description
Working temperature
PU
Rods, flux-coated
ca. 900 °C
5 kg
Description
Working temperature
PU
Rods, massive
ca. 900 °C
25 kg
Description
Working temperature
PU
Rods, flux-coated
ca. 900 °C
5 kg
Special brass hard solder “UM” ISO 3677, B-Cu59ZnSn(Ni)(Mn)(Si); DIN EN 1044, CU 306 (formerly L-CuZn39Sn, DIN8513) flux-coated, DIN EN 1045 - FH 21 For hard soldering of copper, nickel and steel, as well as for welding of brass and bronze.
Especially suited for hard soldering of galvanised steel sheets Item no.
Size
30112050
2.00 mm x 500 mm
30112550
2.50 mm x 500 mm
30113050
3.00 mm x 500 mm
Nickel brass hard solder ISO 3677, B-Cu48ZnNi(Si); DIN EN 1044, CU 305 (formerly L-CuNi10Zn42, DIN 8513) for hard soldering of steel, malleable iron, nickel, nickel base alloys and cast iron Item no.
Size
30202000
2.00 mm x 1000 mm
30203000
3.00 mm x 1000 mm
30204000
4.00 mm x 1000 mm
Nickel brass hard solder “UM” ISO 3677, B-Cu48ZnNi(Si); DIN EN 1044, CU 305 (formerly L-CuNi10Zn42, DIN 8513) flux-coated, DIN EN 1045 FH 21, for hard soldering of steel, malleable iron, nickel, nickel base alloys and cast iron Item no.
Size
30212050
2.00 mm x 500 mm
30212550
2.50 mm x 500 mm
30213050
3.00 mm x 500 mm
30214050
4.00 mm x 500 mm
- 37 -
Fluxes for brass hard solder Pickling agent
Hard solder powder “UNIVERSAL” DIN EN 1044 - FH 21, for hard soldering of copper, copper base alloys and steel as well as welding of brass. To be used in combination with hard solders that have working temperatures higher than 800 °C.
Item no.
PU
Delivery form
26200050
50 pcs
0.100 kg plastic jar
26200055
50 pcs
0.250 kg plastic jar
26200060
25 pcs
0.500 kg plastic jar
26200070
16 pcs
1.000 kg plastic jar
Effective temperature
800 - 1100 °C
Hard solder paste “UNIVERSAL” DIN EN 1044 - FH 21, for hard soldering of copper, copper base alloys and steel as well as welding of brass. To be used in combination with hard solders that have working temperatures higher than 800 °C.
Item no.
PU
Delivery form
26250050
50 pcs
0.100 kg plastic jar
26250055
50 pcs
0.250 kg plastic jar
26250060
25 pcs
0.500 kg plastic jar
26250070
16 pcs
1.000 kg plastic jar
Effective temperature
800 - 1100 °C
Pickling agent 148 for removing hard solder flux residue
Item no.
PU
Delivery form
Area of application
26600070 26600076
1 pc
1.0 l bottle
1 pc
5.0 l canister
Copper and copper base alloys
- 38 -
Fluxes for general soldering
Solder liquid DIN EN 29454.1, 3.1.1.A (F-SW 12) Flux for general soldering on all metal surfaces except aluminium and stainless steel
Item no.
Delivery form
PU
Description
24220021
Bottle
100 pcs
25 ml bottle with brush inset
24220036
Bottle
100 pcs
50 ml bottle with brush inset
24220051
Bottle
100 pcs
100 ml bottle
24220056
Bottle
45 pcs
250 ml bottle
24220061
Bottle
20 pcs
500 ml bottle
24220071
Bottle
15 pcs
1000 ml bottle
24220086
Canister
1 pc
25.0 l canister
24220022
Simple-fix
12 pcs
“new!” 25 ml Simple-fix “new!”
24220052
Simple-fix
12 pcs
“new!” 100 ml Simple-fix “new!”
Solder grease DIN EN 29454.1, 3.1.1.C (F-SW 21) Flux for general soft soldering of copper and copper base alloys.
Item no.
PU
Delivery form
Description
24310010
200 pcs
Can
20 g can
243100351
200 pcs
Can
50 g can
243100501
150 pcs
Can
100 g can
243100551
50 pcs
Can
250 g can
24310060
25 pcs
Bottle
0,500 kg bottle
24310070
16 pcs
Bottle
1.0 kg bottle
24310075
1 pc
Bucket
5.0 kg bucket
- 39 -
Flux-cored soft solder wires
ISO-Core® “RA“ Flux-cored, halide activated solder wire Flux acc. to DIN EN 29454.1, 1.1.2.B or DIN EN 61190-1-3, ROM1 resp. Standard solder wire for manual soldering in electrical engineering , standard flux content 2.5 % Item no. (No.s 1- 4)
Alloy
DIN EN 29453
DIN EN 61190
Melting range
1884 . . . .
Sn95,5Ag3,8Cu0,7
-
Sn96Ag04Cu0,7
217 °C eutectic
1895 . . . .
Sn97Ag3
S-Sn97Ag3
-
221 - 224 °C
1894 . . . .
Sn99,3Cu0,7
S-Sn99Cu1
Sn99Cu.7
227 °C eutectic
1897 . . . .
Sn97Cu3
S-Sn97Cu3
-
230 - 250 °C
551894 . . . .
Sn100Ni+
Fuji Patent
-
227 °C eutectic
1860 . . . .
Sn60Pb40
S-Sn60Pb40
Sn60Pb40
183 - 190 °C
1864 . . . .
Sn60Pb38Cu2
S-Sn60Pb38Cu2
Sn60Pb38Cu02
183 - 190 °C
1853 . . . .
Pb50Sn50
S-Pb50Sn50
Sn50Pb50
183 - 215 °C
1840 . . . .
Pb60Sn40
S-Pb60Sn40
Sn40Pb60
183 - 235 °C
1832 . . . .
Pb70Sn30
S-Pb70Sn30
Sn30Pb70
183 - 255 °C
lead-free/-containing
lead-free
lead-containing
Other alloys, sizes and delivery forms are available upon request.
ISO-Core® “EL“ Flux-cored, halide-free solder wire acc. to DIN EN 29454.1, 1.1.3.B or DIN EN 61190-1-3, ROL0 resp. No-clean standard solder wire for manual soldering in electronics, standard flux content 3.5%
Item no. (No.s 1- 4)
Alloy
DIN EN 29453
DIN EN 61190
Melting range
2084 . . . .
Sn95,5Ag3,8Cu0,7
-
Sn96Ag04Cu0,7
217 °C eutectic
2095 . . . .
Sn97Ag3
S-Sn97Ag3
-
221 - 224 °C
2094 . . . .
Sn99,3Cu0,7
S-Sn99Cu1
Sn99Cu.7
227 °C eutectic
2097 . . . .
Sn97Cu3
S-Sn97Cu3
-
230 - 250 °C
552094 . . . .
Sn100Ni+
Fuji Patent
-
227 °C eutectic
2060 . . . .
Sn60Pb40
S-Sn60Pb40
Sn60Pb40
183 - 190 °C
2064 . . . .
Sn60Pb38Cu2
S-Sn60Pb38Cu2
Sn60Pb38Cu02
183 - 190 °C
2040 . . . .
Pb60Sn40
S-Pb60Sn40
Sn40Pb60
183 - 235 °C
Other alloys, sizes and delivery forms are available upon request.
- 40 -
lead-free/-containing
lead-free
lead-containing
Flux-cored soft solder wires
ISO-Core® “SP“ flux-cored soft solder wire acc. to DIN EN 29453 flux acc. to DIN EN 29454.1, 2.1.3.B Standard flux content 2.5% For general soldering of copper and copper base alloys
Item no. (Numbers 1- 4)
Alloy
DIN EN 29453
DIN EN 61190
Melting range
1532 . . . .
Pb70Sn30
S-Pb70Sn30
Sn30Pb70
183 - 254 °C
1540 . . . .
Pb60Sn40
S-Pb60Sn40
Sn40Pb60
183 - 190 °C
1560 . . . .
Sn60Pb40
S-Sn60Pb40
Sn60Pb40
183 - 238 °C
Other alloys, sizes and delivery forms are available upon request.
Diameter Item no. (Numbers 5+6)
Spools
Ø in mm
Item no. (Numbers 7+8)
Size
15 . . 10 . .
1.00
15 . . . . 10
0.10 kg
15 . . 15 . .
1.50
15 . . . . 20
0.25 kg
15 . . 20 . .
2.00
15 . . . . 30
0.50 kg
15 . . 30 . .
3.00
15 . . . . 40
1.00 kg
15 . . 40 . .
4.00
15 . . . . 50
5.00 kg
ISO-Core® “AL“
!”
“new
ISO-Core® “VA“
!”
“new
Example for the item number: “15401520” Numbers 1+2
Numbers 3+4
Numbers 5+6
No.s 7+8
15
40
15
20
ISO-Core® “SP“
Pb60Sn40
Ø = 1,50mm
0,25 kg
flux-cored soft solder wire for soldering of aluminium and aluminium base alloys acc. to DIN EN 29454.1, 2.1.2.C preferred alloy: S-Sn97Cu3 standard flux content: 4 % Diameter: 1,5 mm and 2,0 mm flux-cored soft solder wire for soldering of steel and stainless steel acc. to DIN EN 29454.1, 3.1.1.C preferred alloy: Sn96,5Ag3,5 standard flux content: 4 % Diameter: 1.5 mm and 2.0 mm Other sizes are available upon request.
- 41 -
Auxiliary materials
Tinner for cleaning and tinning of soldering tips – especially in the field of electronics –
Item no.
Size
PU
Description
27100010
Tinner
1 pc
Tinner, 20 g can
27100011
Tinner-lead free
1 pc
“new!” Tinner-lead free, 15 g can “new!”
De-solder braid flux-saturated copper braid for unsoldering components and removing excess solder on printed circuits
Item no.
Width
27161000
1.0 mm
27161500
1.5 mm
27162000
2.0 mm
27162500
2.5 mm
27163000
3.0 mm
27162030
2.0 mm
27162530
2.5 mm
PU
Description
100 pcs
1.6 mm snap spool
1 pc
30 m spool
White vaseline Protective agent, especially suited for electric connections, e.g. battery terminals, battery connecting cables and car aerials, free of resin and acid
Item no.
PU
Delivery form
Description
27180030
200 pcs
Can
40 g can
27180097
100 pcs
Tube
60 g tube
- 42 -
General Terms and Conditions 1. General These General Sales Terms and Conditions are a constituent part of all our offers and order confirmations. Any declarations or agreements which deviate from the following conditions or our order confirmation are only binding if we have expressly agreed to them in writing. Our offers are fundamentally not binding. We are only obligated by our written order confirmation. The type and extent of the delivery are stipulated in the order confirmation. The agreement is also deemed to be in effect in the event of deviating conditions of the Customer in relation to our order confirmation, unless the Customer explicitly contradicts this in writing and on time. 2. Delivery and delivery time Our deliveries are performed ex works or ex warehouse. The delivery date is the day of disposition in the works or warehouse. If an agreed delivery time is not observed, the Customer can set an appropriate grace period in writing and cancel the contract after its unsuccessful expiration. Further claims are excluded. In the event that orders or off-the-shelf orders are not accepted or requested on schedule, the Customer bears the additional costs incurred. Furthermore we can demand immediate payment and compensation for damages or entirely or partially withdraw from the contract. 3. Transfer of risk and dispatching Even if freight paid delivery has been agreed, the risk is transferred to the Customer once the contract goods have left our works. The shipment is generally sent uninsured, also for freight paid deliveries. Upon written request of the Customer a transport, breakage or fire insurance can be arranged at the Customer‘s cost. 4. Breach of contract The Parties shall be released from their duty to perform in the event of a breach of contract due to force majeure or unavoidable events. This applies for us as well so far as the breaches of contract occur over our upstream suppliers. Cases of force majeure or an unavoidable event also include official interventions, strikes, lockouts, malfunctions in the power and raw material supply as well as unusual significant increase in price for the raw materials, accidents as well as other unforeseeable events which make a fulfillment of the contractual obligations impossible or unconscionable during this time. In the event that any third party makes infringement claims (copyright or patent rights) on our manufacturing or delivering the delivery item, we may cease the delivery or cancel the contract without prior examination of the legal position. 5. Prices Our prices refer to the defined scope of delivery cited in the order confirmation, exclusive of customs, import, or similar ancillary costs as well as packaging and shipping charges, which are billed separately. Our price calculations are based on the material, personnel, and freight costs effective at the time of contract conclusion. In the event that price changes ensue after the contract conclusion up until delivery due to changes in the aforementioned cost factors, we reserve the right to correct the prices accordingly. 6. Payment In the event that payment is not rendered within the specified time, we calculate interest on arrears starting from the time that payment was due at the respective usual bank rate of credit costs for call money, however at least 8% above the corresponding base rate of the European Central Bank. We expressly reserve the right to assert claims for greater damages. Furthermore we may bill an additional charge of 15.00 euros per letter of reminder. All still respective accounts receivable are immediately due. This also applies in the event of suspension of payment, compromise settlement or insolvency process of the defaulter or the purchasing association. Payments of the Customer to purchasing associations have no discharging effect on us. We may refuse outstanding deliveries or agree to deliver only against a security deposit, prepayment or cash on delivery. Likewise we may withdraw from the contract without notice or demand remedy for breach of contract. Cash, bank transfers and cheques are accepted in payment. Promissory notes are fundamentally not accepted. Cheques are received as payment only subject to the corresponding credit entry by our bank. In the event of accepted cheques we assume no obligation for punctually declaring or procuring a protest. Collection expenses are at the expense of the Customer. Should it turn out after contract completion that the credit situation of the Customer is such that it is not suitable for credit to be granted, we may demand security deposits or prepayments for all due or not yet due claims arising from the contracts, or entirely or partially withdraw from the contracts at our discretion. Claims for restitution of damages of the Customer are in this case excluded. Counter-claims of the Customer do not entitle him to offsetting. Notifications of defects do not postpone the obligation to pay. 7. Retention of title We retain title to all delivered goods until such time as complete payment has been made for all claims arising from the contract. In case payment difficulties arise on the part of the Customer we may take possession of the goods subject to retention of title. Any costs incurred therefrom go on the account of the customer. Repossession of the goods only means a cancellation of the contract if we explicitly declare this to be the case. The Customer may resell the goods subject to retention of title in the ordinary course of business, but is not allowed to pledge them or transfer ownership as security. The Customer is obliged to secure our rights as conditional purchaser upon resale of the goods subject to retention of title on credit.
The Customer already now transfers to us his claim from the resale of the goods subject to retention of title. The Customer may collect on the claim as long as he completely fulfils all his obligations to us and does not fall into financial arrears. In such a case, upon request the Customer must immediately provide all the required information about the assigned claims necessary for the collection, and inform the debtors of the assignment. In the event that the goods subject to retention of title are resold at a higher price along with other goods or after combination or mixing with other goods, then the assignment in advance is only to the amount of value of the original goods subject to retention of title. Furthermore the amount of a collected claim is already transferred to us in advance. The Customer holds the money in trust for us separately as indirect possessor and pays it out to us without delay. The Customer must inform us without delay of any imminent or executed access of third parties to the goods subject to retention of title or to the claims assigned in advance and must provide us with all the necessary information and documentation for an intervention. In the event that the value of securities provided exceeds our claims by a total of more than 25%, at the request of the Customer we will accordingly release the aforementioned securities at our discretion. 8. Product information Our product information and advice result from many years of research work and experience, and are provided to the best of our knowledge. However they serve solely as recommendation and do not justify any obligation to assume liabilities for the Buyer‘s usage of the delivered goods. In any case the Buyer is obligated to examine the suitability of our products and services with regard to the intended usage at his own responsibility. Technical changes which unavoidably occur due to the advances of progressive product development remain explicitly reserved. The contents of our product information are in no case to be considered as assurance of fitness for purpose. 9. Complaints Every delivery must be examined for defects without delay. Complaints are to be immediately stated in writing. The same applies to hidden defects upon determination of the defect. In the event of complaints, the Customer is also obligated to keep the goods properly at his expense until settlement of the notification of defects. Quantitative deviations within usual commercial custom and qualitative deviations within the applicable DIN-EN standards are permissible. We must be provided the opportunity of examining a notified deficiency on the premises. Without our permission, nothing may be changed on the criticized goods, nor may they be used, without loss of warranty rights. 10. Warranty The Customer fundamentally must prove any defectiveness. In the event of justified defects we can correct the shortcomings free of charge, deliver a replacement free of charge, or issue a credit entry for the defective goods at our discretion. The defective goods are to be returned to us at our request. Further claims, especially for compensation for damages, are excluded. However in the event that reworking or compensation delivery remains undone or is impossible, the Customer is entitled to the right of withdrawal from the contract. We can refuse the warranty claim for a deficiency until all due obligations of the Customer have been satisfied. Guarantee entitlements expire at the earliest after the date of minimum durability (expiration date) or after 12 months from the delivery date if no date of minimum durability is specified. Characteristics are only then considered assured if there is an explicit written agreement about this point. The assurance fundamentally does not mean that the Customer is secure against consequential damages caused by defects. 11. Liability Any claims are excluded insofar as the damage results from unsuitable or incorrect processing or usage of our goods. Goods delivered by us may only be used or processed according to our technical information (product information). Any liability of the Vendor is excluded insofar as the damage results from breach of the technical information (product information). The Customer is obligated to examine whether the ordered or recommended goods are suitable for the intended purpose or process. We can assume no liability for the suitability. Insofar as no other provisions have previously been stipulated, we are liable for all further claims for restitution of damages as follows: a) for personal damages to the extent of the law b) for material damages up to the invoiced value of the delivered goods. Any service performances or precious metal surcharges remain unconsi dered. c) Liability for property damage is fundamentally excluded The limit of liability does not apply insofar as we or our legal representatives or vicarious agents act deliberately or with gross negligence. The limit of liability also does not apply if and insofar we are necessarily liable for personal damages or damages to privately used goods according to the law on product liability or for other reasons. 12. Law in Force; Place of Performance; Legal Venue Without exception the law of the Federal Republic of Germany applies. The application of the United Nations Convention on the International Sale of Goods (CISG) from 11 April 1980 is hereby excluded. The place of performance for the parties and exclusive legal venue for any legal disputes, no matter what the legal basis, is Oberhausen. However we reserve the right to also take legal action at the seat of the Customer. If individual provisions of this contract are or become ineffective and/or void, this fact shall have no effect on the validity of the remaining provisions of this contract. The parties shall endeavor to replace those provisions which have become ineffective and/ or void with such provisions which come nearest in meaning to the purpose of the original provisions.
Company profile FELDER GMBH was founded in 1979 in Duisburg, Germany, with the objective to provide a comprehensive range of soft and hard soldering products for a wide variety of business groups, be it sanitary, heating, hardware, roofing, automotive component and electronics sectors. Since its inception, the company has evolved into a leading manufacturer of solders, fluxes, solder pastes and soldering accessories in Germany. Our strengths include flexibility and a broad assortment of products that is without parallel in Europe. With the number of customers constantly growing, we had to expand our production area in 1986. As a result, we moved our operations to Oberhausen, where one of the most modern solder production facilities in Germany was erected.
In spite of expanding our facilities in 1991, we had to increase our production area and warehouse once again in 2005. We produce our soft solders, fluxes, solder pastes and the relevant accessories using state-of-the-art equipment on a total area covering roughly 4,500 m², including our current 4,000 m² production area. In order to provide our customers with maximum quality at all times, we implement strict quality control in accordance with DIN EN ISO 9001:2000 during every phase of production from receipt of metals and chemicals through to the finished products. By maintaining this high quality standard, FELDER GMBH secures its market position for the future.
FELDER GMBH Löttechnik Im Lipperfeld 11 D-46047 Oberhausen
Tel. 0208 / 85035-0 Fax: 0208 / 26080 Email: [emailprotected] Internet: www.felder.de
FELDER GMBH Löttechnik Postfach 10 04 10 D-46004 Oberhausen